HERSHE News
How many cc of men's shoulder filler are needed? Injection volume varies depending on body type
When thinking about a masculine upper body line, one of the areas that naturally draws attention is the shoulders.
For those whose shoulders appear narrow or whose neckline to shoulder line falls in a rounded shape,
even consistent exercise might not create the desired shoulder frame, which can be frustrating.
For this reason, more and more people are looking into men's shoulder filler.
One of the most frequently asked questions when preparing for consultation is, “How many cc of men's shoulder filler should I get?”
People wonder if 20cc is enough, what the difference is between 30cc and 50cc, and if a larger body frame requires more.
However, shoulder filler is not a procedure where the design is determined solely by the injection amount.
It is a process that requires considering the individual’s skeletal structure and shoulder shape, muscle development, left-right balance, and desired shoulder line together.
Today, we will take a detailed look at men's shoulder filler from the perspective of HERSHE Plastic Surgery,
covering the typical volume range, differences according to body type, and things to check before the procedure.
How many cc of men's shoulder filler are usually injected?
When searching for men's shoulder filler, you can find various volumes such as 20cc, 30cc, 50cc, and so on.
At HERSHE Plastic Surgery, the initial injection volume for men's shoulder filler is generally guided within a range of approximately 20–50cc,
depending on the individual's body type and design.
However, this number is a general reference range and is not a recommended volume that applies to all men.
The actual plan can vary depending on the basic bone structure of the shoulders, which areas lack volume, and the desired shoulder line.
For example, even if the same 30cc is used, the locations and distribution of filler may differ between someone lacking volume on the outer shoulder and someone concerned about the contour around the end of the clavicle.
Therefore, when planning men's shoulder filler, it is important to consider not only how many cc to inject,
but also which areas will be treated, in what proportions, and in what form.
How do 20cc, 30cc, and 50cc of men's shoulder filler differ?
For men considering shoulder filler, the most commonly compared amounts are 20cc, 30cc, and 50cc.
Rather than assuming that each number directly determines how much wider the shoulders will become,
it is better to understand these amounts as references that vary according to the current shoulder condition and treatment plan.
1. Around 20cc
After checking the current shoulder shape and areas lacking volume, this amount may be considered when planning treatment with a relatively small volume.
It may be discussed during consultation when the goal is to refine the volume or contour of specific areas rather than significantly change the entire shoulder frame.
However, 20cc does not necessarily mean that it will be sufficient or suitable for everyone.
2. Around 30cc
This amount may be considered when planning a moderate volume, taking into account the lack of shoulder volume and the overall proportions of the upper body.
It is important to examine the shape of the shoulder tip, the line connecting the neck and shoulders,
and the structure around the clavicle, and then distribute the volume appropriately to the necessary areas.
Even with the same 30cc, the design direction may vary depending on the individual's bone structure and skin condition.
3. Around 50cc
This amount falls within the general reference range for men's shoulder filler provided by HERSHE Plastic Surgery.
It may be considered during consultation when planning volume across a wider area while taking the upper body frame into account.
However, increasing the volume does not necessarily make the shoulders appear more natural or create the desired shoulder shape.
If excessive volume is planned without considering the current tissue condition and shoulder shape,
the area where the neck and shoulders connect may appear unnatural, so caution is required.
The important point is that 20cc, 30cc, and 50cc do not each represent a fixed result.
The injection volume, treatment location and distribution, characteristics of the filler, and the individual's anatomical structure should all be considered together.
※ When comparing volumes, it is advisable to confirm during consultation whether the stated amount refers to the total for both shoulders or the amount for one side.
Why does the required volume of shoulder filler differ even among men?
The main reason is that each person's shoulder structure, muscles, skin, and fat layers are different.
1. Shoulder structure and clavicle shape
Shoulders do not appear narrow simply because they lack volume.
The length and direction of the clavicle, the shape around the shoulder tip or acromion,
and the overall upper body structure can affect how the shoulder line appears.
Therefore, the basic structure of the shoulders should be examined first.
Cases in which the shoulders appear narrow due to the skeletal structure itself
and cases in which the outer shoulders appear to lack volume may require different design approaches.
2. Development of the trapezius and deltoid muscles
When considering men's shoulder filler, the degree of development of the trapezius and deltoid muscles should also be examined.
If the trapezius muscle is well developed, the slope between the neck and shoulders may appear prominent.
The volume of the outer shoulder may also appear different depending on the shape of the deltoid muscle.
Rather than simply adding filler, it is important to examine the current muscle development and shoulder contours together.
In some cases, it may be difficult to create the desired line with filler alone,
and other factors such as the condition of the trapezius muscle may need to be considered.
3. Asymmetry between the left and right shoulders
Even if both shoulders appear similar when viewed directly in a mirror, closer examination may reveal differences in height, angle, or volume.
The left and right shoulders may appear different due to the dominant arm, habitual posture, or differences in muscle development.
In such cases, injecting the same amount on both sides may not necessarily be the most suitable approach.
After examining each shoulder separately, the injection sites and amounts may be planned differently as needed.
4. Condition of the skin and soft tissue
Even with the same skeletal structure, the shoulder contour may appear different depending on the thickness
and elasticity of the skin and the condition of the subcutaneous tissue.
This is why both the condition of the tissue where the filler will be injected and the degree of skin laxity should be examined.
Instead of deciding the volume solely according to the desired shoulder width, a treatment plan suitable for the actual tissue condition should be established.
Where is men's shoulder filler injected?
Rather than uniformly enlarging the entire shoulder, it is important to first determine which areas currently lack volume.
In general, the following areas may be examined during consultation.
1. Outer shoulder
If the outer shoulder lacks volume, the upper body frame may appear relatively narrow.
The shape of this area and the contour around the deltoid muscle are examined when planning the design.
2. Shoulder tip
The shape extending from the clavicle to the shoulder tip can affect the overall shoulder line.
Any depression or lack of volume around the shoulder tip should be examined.
3. Around the clavicle
If the clavicle contour is unclear or there are concerns about the balance of the surrounding volume,
the design may be reviewed after confirming the anatomical structure and suitability for the procedure.
Shoulder filler is therefore not simply about injecting a large amount into a single area.
The overall upper body silhouette connecting the neck, clavicles, shoulders, and arms should be considered.
What should be considered when planning men's shoulder filler at HERSHE Plastic Surgery?
At HERSHE Plastic Surgery, each individual's body shape is examined three-dimensionally when planning shoulder filler.
The treatment plan and injection volume are determined through consultation based on the shoulder shape and desired design.
The shoulders are visible not only from the front but also from the sides and back, so it is important to examine their overall balance from multiple angles.
1. One-on-one assessment based on body type
The current width and height of the shoulders, clavicle shape, degree of muscle development, and left-right asymmetry are examined.
Based on these findings, the appropriate volume and design direction are discussed for each individual.
2. A three-dimensional, 360-degree shoulder-line design
The shoulder line is examined not only from the front, but also from the sides and back.
The design is planned by considering the line from the neck to the shoulders, the contour of the outer shoulders, and the proportions of the entire upper body.
3. Filler injection performed in an upright sitting position
At HERSHE Plastic Surgery, shoulder filler is injected while the shoulder shape is examined in an upright sitting position.
When lying down, the muscles and shoulder position may appear different from their usual standing or sitting posture.
It is therefore important to examine the shoulder line in a natural position.
This approach also allows the patient's condition to be monitored and communication with the medical staff to continue during the procedure.
4. Consideration of filler characteristics and the injection site
Compared with facial areas, the shoulders require consideration of a broader surface area and overall shape.
When selecting a filler, it is necessary to consider not only the product name but also its physical properties,
such as viscosity and elasticity, as well as the injection site and tissue condition.
HERSHE Plastic Surgery uses hyaluronic acid fillers, which may be selected or combined according to the individual's assessment.
Things to know before a men's shoulder filler procedure
If you are planning shoulder filler, it is advisable to review not only the injection volume but also the procedure process and post-procedure care in advance.
1. Procedure time
The shoulder filler procedure takes approximately 20 minutes.
The actual time may vary depending on the individual's assessment and the scope of the procedure.
2. Daily activities after the procedure
In many cases, patients can return to their daily activities immediately after the procedure.
However, swelling, bruising, or tenderness may occur at the injection site.
Recovery may vary depending on the individual's condition and the scope of the procedure.
3. When can exercise be resumed?
Light exercise may generally be considered approximately 1–2 weeks after the procedure.
Exercise involving extensive arm movement or high-intensity activity should be resumed after checking recovery conditions such as swelling and pain.
Men who regularly perform shoulder exercises or upper-body strength training should discuss their exercise plans with the medical staff before the procedure.
4. Is a touch-up necessary?
A touch-up is not necessarily required for everyone.
After the procedure, the need for additional volume may be discussed with the medical staff based on the tissue recovery process and the current shoulder line
.
Men's shoulder filler: Frequently asked questions
Q. Is 50cc enough for men's shoulder filler?
A. Not necessarily. The general reference range for men provided by HERSHE Plastic Surgery is approximately 20–50cc.
However, the actual amount required varies depending on the individual's skeletal structure, shoulder shape, muscle development, and desired design.
Planning the volume according to the current shoulder condition is more important than simply injecting a large amount.
Q. Does a larger body frame require more shoulder filler?
A. Having a larger body frame does not necessarily mean that a larger amount is required.
Shoulder width, clavicle shape, volume around the shoulder tips, and the condition of the muscles and soft tissue should all be examined together.
Q. Is the same amount injected into both shoulders?
A. Since the height, shape, and volume of the two shoulders may differ, the same amount does not necessarily need to be injected into each side.
The injection amounts and locations may be planned differently after assessing the left-right balance.
Q. How is building the shoulders through exercise different from receiving shoulder filler?
A. Exercise influences shoulder shape and volume through muscle development. Shoulder filler, on the other hand,
is a procedure in which a medical professional injects filler after evaluating the contours and volume of specific areas.
Because the two approaches differ, it is advisable to discuss which option is suitable for your current concerns and physical condition.
Q. Can I exercise immediately after receiving shoulder filler?
A. Immediately after the procedure, it is advisable to avoid exercise that places strain on the shoulders or involves high-intensity upper-body movement.
Light exercise may generally be resumed after 1–2 weeks. More vigorous activities should be resumed after checking the recovery status, including swelling and pain.
When considering men's shoulder filler, it is natural to focus first on numbers such as 20cc, 30cc, or 50cc.
However, even among men, the necessary volume and design may vary depending on the shoulder structure,
clavicle shape, development of the trapezius and deltoid muscles, and left-right balance.
Rather than using another person's injection volume as a standard, it is important to first assess the shape and condition of your own shoulders.
At HERSHE Plastic Surgery, each individual's body type and shoulder structure are reviewed before the treatment plan and volume are discussed.
The procedure is performed while examining the shoulder line in a seated position.
If you are considering men's shoulder filler, it is advisable to check whether the treatment plan is appropriate for your current shoulder characteristics
and desired upper-body line, rather than deciding solely on the number of cc.
힙업리프팅으로 애플힙 뒤태 만들수있나요? 힙업성형 Q&A
어깨필러 상담부터 시술과정까지, 직각어깨 REAL 현장
쌍수하고 술 언제부터 마셔도 되나요?
PREFER TO CONTACT US DIRECTLY?
Choose one of the channels below to begin a direct conversation with our English consultation team.
다음글
이전글